Site icon NetworkHunt

How to add Cisco FTD (Firepower Threat Defense) Images to Eve-ng

Cisco Firepower Threat Defense (FTD) is one of the leading security solutions in the networking domain, widely used for intrusion prevention, advanced malware protection, and URL filtering. For network engineers, especially those preparing for the CCIE Security v6 exam, EVE-NG serves as an invaluable tool to simulate complex network environments, including FTD deployments.

This blog provides a detailed step-by-step guide on adding Cisco FTD to EVE-NG to enhance your lab experience.


Why Use Cisco FTD on EVE-NG?


Table of Contents

Step 1: Download the Cisco FTD Image

You have two options to download the Cisco FTD image:

  1. Cisco Official Website:
    • Log in to Cisco Software Central.
    • Search for the FTD image compatible with your lab.
    • Download the .qcow2 file for virtualized environments.
  2. Alternate Source:
    • Use an alternate, pre-approved link to download the required .qcow2 image.

Step 2: Create a Cisco FTD image Folder

1. Navigate to the QEMU Directory:

cd /opt/unetlab/addons/qemu

2. Create a Directory for the FTD Image:

mkdir -p firepower6-FTD-6.4.0-362

Replace 6.4.0-362 with the version of your Cisco FTD image.


Step 3: Upload the Image to EVE-NG

1. Transfer the Image:
Use tools like FileZilla or WinSCP to upload the downloaded FTD .qcow2 file to the EVE-NG server.

2. Upload the image to /opt/unetlab/addons/qemu/firepower6-FTD-6.4.0-362.

3. Verify the Upload:

SSH into your EVE-NG server and check if the file exists in the directory:

ls -l /opt/unetlab/addons/qemu/firepower6-FTD-6.4.0-362


Step 4: Fix Permissions

1. Set Correct Permissions:

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

2. Verify Permissions:
Check that the permissions are properly applied:

ls -l /opt/unetlab/addons/qemu/firepower6-FTD-6.2.0-362


Step 5: Add FTD Node in EVE-NG

  1. Access the EVE-NG Web Interface:
    • Open a browser and log in to the EVE-NG web UI.
  2. Create or Open a Lab:
    • Create a new lab or open an existing one.
  3. Add the FTD Node:
    • In the node configuration menu, locate the newly added FTD image and add it to the lab topology.
  4. Start the FTD Node:
    • Power on the node and connect to the console to verify a successful boot.

Tips for a Smooth Setup


Troubleshooting

Exit mobile version