Site icon

How to add Cisco SDWAN Images to EveNG

how to add cisco sdwan images to eveng

This article will show the step-by-step process of how to add Cisco SDWAN images to EveNg. Eve-ng is one of the best emulators to Practice with Cisco SDWAN, where you can import the image in Eve-ng and access it directly. You can set up your own lab and practice as much as you want.
To install Eve-ng on your desktop check below Post-
How to install Eve-ng on Vmware.

Follow the Below Steps to add the Cisco SDWAN image to Eveng.-

To download the latest Cisco SDWAN images, you can subscribe to Lab4Work.

1. Download Cisco SDWAN for eve-ng.

Images used and supported for this post.

EVE Image NameDownloaded FilenameVersionvCPUsvRAMInterfaces

If you do not have access to Cisco Website you can download the image from below alternate link.
Images provided above are strictly for educational purposes and are not hosted on the server. We are just indexing the links found on the internet for educational purposes only.

2. Create an Image directory in EVE-NG

SSH to EVE and login as root, from cli and create an image directory in the EVE:

mkdir /opt/unetlab/addons/qemu/vtbond-19.2.3

3. Preparing Eve-ng for Cisco SDWAN.

Upload the downloaded image to the EVE using for example FileZilla or WinSCP. Then login as root using SSH protocol and uncompress it:

create the abc directory and upload the image in the directory using FileZilla or WinSCP and then decompress the image.

Upload the downloaded image to the EVE using, for example, FileZilla or WinSCP.

4. Upload the Cisco SDWAN images to Eve-ng.

Go to the image directory and upload the Cisco SDWAN images to vtbond-19.2.3

5. Fixing the permission

/opt/unetlab/wrappers/unl_wrapper -a fixpermissions 
Exit mobile version